Cold Forming Oils
BECHEM’s range of cold forming oils have been developed after thoroughly understanding requirements of the customer and subsequently collaborating with machine manufacturers for superior product function.
Extreme surface pressure between tool and work piece require high performance parting agents which are able to build up pressure resistant layers during the cold forming process such as punching and blanking in order to prevent premature wear, fretting or even breakage of the tools.
BECHEM’s range of cold forming oils have been developed after thoroughly understanding requirements of the customer and subsequently collaborating with machine manufacturers for superior product function. Berudraw and Beruform range of speciality fluids by BECHEM for punching and blanking operations are cost efficient, eco friendly and provide superior surface finish.
BECHEM’s range of cold forming oils
Non water miscible oil for drawing of round bars and profiles (square, hexagon) with difficult geometries. Recommended for deep drawing as well as demanding sheet forming and cold forming operations.
| Berudraw 4046 |
|
|---|---|
| Viscosity [mm2/S] at 40 °C | 277 – 337 |
| Flash Point [°C] | ≥ 186 |
| Materials to be processed | Steel, Stainless steel |
Non water miscible cold forming oil for demanding and multiple forming operations. Suitable for cold extrusion, piercing, punching and deep drawing operations. Provides longer coolant service life. Free of Chlorine and heavy duty metals.
| Beruform KFP 96 |
|
|---|---|
| Viscosity [mm2/S] at 40 °C | 81.5 – 100.5 |
| Flash Point [°C] | ≥ 170 |
| Materials to be processed | Steel, Stainless steel |
Recommended for punching, bending and stamping operations. High-performance, fully synthetic forming oil for minimum quantity lubrication with higher flash point. Can be applied by spray equipment, drip oiler, roller or brush.
| Beruform STO 110 |
|
|---|---|
| Viscosity [mm2/S] at 40 °C | 41.4 – 50.6 |
| Flash point [°C] | ≥ 290 |
| Materials to be processed | Steel, Stainless steel, Aluminium, Copper |
Non water miscible oil for easy to medium machining operations such as punching, cutting and bending. Free of chlorine and heavy metals. Provides excellent surface finish. Can be applied by spray equipment, drip oiler, roller or brush.
| Beruform STO 5 |
|
|---|---|
| Viscosity [mm2/S] at 40 °C | 4.7 |
| Flash point [°C] | ≥ 160 |
| Materials to be processed | Steel, Stainless steel, Aluminium, Copper |
Biodegradable punching and bending oil. Recommended for operations of fine sheets upto 1mm approx. Also for forming of electrical contacts.
| Beruform VSM 9 |
|
|---|---|
| Viscosity [mm2/S] at 40 °C | 1.3 |
| Flash Point [°C] | ≥ 65 |
| Materials to be processed | Steel, Aluminium, Copper and alloys |
High performance multifunctional oil for demanding forming processes such as multi stage presses in cold forming processes. Suitable for cold extrusion, piercing, punching, blanking and drawing etc. Extends tool life. Provides excellent forming performance. Provides good corrosion protection.
| Beruform 148-68 I |
|
|---|---|
| Kin. Viscosity at 40 C (mm2/S) | 61-75 |
| Flash Point [°C] | ≥ 190 |
| Materials to be processed | Steel, Aluminium, Copper and Brass |
Non water miscible multifunctional oil for Cold massive forming on multiple stage presses. Suitable for cold extrusion, piercing, punching, blanking and drawing etc. Extends tool life. Extremely resistant to ageing. Provides good corrosion protection.
| Beruform MF 155 I |
|
|---|---|
| Kin. Viscosity at 40 C (mm2/S) | 99 – 121 |
| Flash Point [°C] | ≥ 180 |
| Materials to be processed | Steel, Stainless Steel, Aluminium, Copper and Brass |
Extreme Pressure forming oil suitable for forming operations like deep drawing, punching, fine blanking and tube bending. Excellent EP and lubrication properties of BECHEM Form 180 C extends tool life and ensures maximum reduction per pass in cold pilgering process. Ensures superior surface finish. Offers good corrosion protection.
| BECHEM Form 180 C |
|
|---|---|
| Viscosity [mm2/S] at 40 °C | 170-210 |
| Flash point [°C] | ≥ 180 |
| Materials to be processed | Stainless steel, High alloy steel, Aluminium, Non-ferrous metal, High nickel alloys |
Connect with us for more information on product samples, technical comparisons and details on pack sizes.
Latest Blog Updates
Support response: Median email response time of less than 3 hours.