Premature failure of high speed bearings installed at the dryer section of paper machine were a regular phenomenon at an integrated paper plant. The bearing failures resulted in undesired production downtime and a constant worry to the Maintenance Department. High temperatures averaging about 90°C to 100°C was recorded at these bearings. While high process temperature was suspected initially , the temperature difference between the shaft and plummer block did not support the theory. It was dire situation for the Maintenance team.

Set up by India’s reputed Corporate house with established businesses in various sectors, the modern paper manufacturing plant is credited as country’s largest integrated paper unit. The plant with advanced machinery, manufactures fine paper, paper boards for packaging and graphic solutions and helps the company in maintaining the leadership position in Indian fine paper market and value added paperboard segments.

The integrated paper unit has the complete set up from debarking and wood chipping to pulping and refining sections to the final process output at the paper machine. At the paper machine, stock from the pulping process is woven to continuous paper, stretched into paper film, pressed, dried and finally rolled into bales.

During a regular prospecting visit by the Bechem Application Engineering team to the unit, the Plant Head expressed his concern regarding repeated premature bearing failures fans at the dryer fan section of a paper machine. The maintenance team had the understanding that heat transfer from the ‘hot air blowing’ over the shaft could be the reason for abnormal temperature rise in the bearing and thereby its failure. The Bechem team however suspected that the issue could be related to inadequate lubrication and requested the Plant head for a lubrication audit of the dryer section. Having received the approval, the Bechem team methodically studied and arrived at the conclusion that ‘inadequate lubrication’ indeed was the primary reason for bearing failures.

The team initially monitored and recorded temperatures of bearings at both, drive end (DE) and non drive end (NDE) of motors in about eight applications. The spherical roller bearings included that of the heater and hot air blower fans, drier and recirculation fans, pre coat supply fan, post size press fan as well as vacuum fans. Temperature readings of bearings that noted higher temperature consistently are given below for reference,

Temperature measured near the fan housing did not cross 65 °C probably due to the thermal insulation provided, however the bearings operating in the plummer block recorded much higher temperatures.

Detailed study of the applications revealed that the abnormal temperature rise in the plummer block bearings was majorly due to lubrication failure

DN Value can be calculated using below given formula
D*N = Ka * n * dm

Lubrication quantity: Considering the bearing types, application and recommended grease, Bechem’s in house lubrication procedure recommended an average quantity of 42 g. per bearing instead of the earlier maintenance practice of 150-200 g.

Based on the comprehensive report submitted to the Plant Head, an opportunity was provided to prove Berutox FB 22’s performance in one of the critical fan bearings . Having thoroughly cleaned the bearings, an exact quantity of 42 g was measured and manually applied on bearings at both ,drive and non drive ends. The trial lasted for 15 days with the temperature being measured for every 3 hours.

Apart from the reduction in bearing temperatures, no bleeding of oil was observed during the trial period. As expected, no bearing failures was reported

• Using Berutox FB 22, Customer experienced reduction of 25-30°C in bearing temperatures
• Lubrication interval increased from 7 to 30 days. No bearing failure has been reported at the plant in drier section for almost 18 months after shifting to Berutox FB 22 spindle bearing grease
• No production downtime due to bearing failures. Currently all high speed spindle bearings in the drier section of the paper machine run with Berutox FB 22 high speed spindle bearing grease

D

eveloped by BECHEM Germany for high speed applications and bearings, Berutox FB 22 delivers unmatched performance in terms of lubricating life even under extreme temperatures and operating conditions.

With Barium complex soap as thickener and Polyalphaolefin (PAO) base oil, Berutox FB 22 provides superior corrosion and wear protection. Supplemented with an advanced additive package, the high speed grease also possesses superior load carrying capability as well as ability to absorb vibrations and shock loads.