Neat Cutting Oils
BECHEM’s range of neat cutting oils are recommended for intensive machining process with high stock removal such as gear cutting, thread cutting, drilling and deep drilling, honing, hobbing, turning etc.
BECHEM’s range of neat oils have excellent EP and anti wear properties essential for increased tool life and achieve superior surface finish. Berucut and Berugrind range of neat oils by BECHEM possess excellent flushing properties and support high speed cutting. These special series are extremely resistant to ageing and provide longer sump life.
BECHEM’s range of neat cutting oils are recommended for intensive machining process with high stock removal such as gear cutting, thread cutting, drilling and deep drilling, honing, hobbing, turning etc.
BECHEM’s range of neat cutting oils
Recommended for grinding of tungsten carbide tools, honing, engraving, mould construction, die manufacturing processes. Excellent cooling properties with low evaporation tendency. High dirt carrying capacity. Has good flushing properties. Minimal foam formation.
| Berugrind 7 HC |
|
|---|---|
| Viscosity [mm2/S] at 40 °C | 7 – 9 |
| Flash point [°C] | ≥ 160 |
| Materials to be processed | Carbides, Steel, Cast steel, Stainless steel, Titanium |
Recommended for honing, finishing & grinding operations. Low evaporation tendency, high sludge carrying properties. Helps achieve superior surface finish and prolongs tool life. Good rinsing properties prevents honing dies from getting clogged up.
| Berucut SFO 205 |
|
|---|---|
| Viscosity [mm2/S] at 40 °C | 5-6 |
| Flash point [°C] | ≥ 120 |
| Materials to be processed | Steel, Stainless steel, Cast iron, Non-ferrous metals |
Recommended for turning, drilling, milling, grinding, deep drilling, thread cutting, gear cutting and severe grinding operations. Supports high speed cutting. No formation of built up edges. Has excellent EP/AW properties, excellent filterability as well as flushing properties.
| Berucut SCO 322 HC |
|
|---|---|
| Viscosity [mm2/S] at 40 °C | 21.5 – 25.5 |
| Flash point [°C] | ≥ 210 |
| Materials to be processed | Steel, Stainless steel, Non-ferrous metal |
Recommended for vertical broaching, sawing, thread cutting, thread forming and massive forming operations. Low evaporation tendency. High load carrying and rinsing performance. Powerful AW/EP additives.
| Berucut RMO 244 |
|
|---|---|
| Viscosity [mm2/S] at 40 °C | 20 – 24 |
| Flash point [°C] | ≥ 150 |
| Materials to be processed | Steel, Stainless steel |
High performance cutting fluid, developed on fully synthetic base with excellent anti wear properties . Developed for machining processes such as Turning, Milling, Deep drilling, thread cutting and tooth grinding. Suited for machining components used in medical technology. Specially designed for increasing productivity and ensure extended tool life. Provides excellent surface finish along with good corrosion protection. Minimises foam formation. Free of Chorine and Heavy metals. Non cytotoxic acco to DIN EN ISO 10993-5:2009
| Berucut XC 1115 |
|
|---|---|
| Kin. Viscosity at 40 C (mm2/S) | 15 |
| Flash point [°C] | 195 |
| Materials to be processed | Steel, Titanium, Nickel alloys, Stainless Steel, Chrome Cobalt and Non-ferrous metals |
Berucut XC 1010 is a non-water miscible coolant based on synthetic fluids developed for difficult machining processes. The high-performance cutting fluid based on advanced formulation is recommended for demanding and high-speed machining processes while ensuring longer tool life.
The special cutting fluid has low evaporation tendency and high flash point enabling higher safety quotient and better work environment. Berucut XC 1010 ensures low consumption for machining processes and also provides good corrosion protection. Recommended for machining steel and cast iron.
Recommended for turning, drilling, milling, thread cutting, tooth grinding, thread forming operations etc.
| Berucut XC 1010 |
|
|---|---|
| Kin. Viscosity at 40 C (mm2/S) | 13 |
| Flash point [°C] | 185 |
| Materials to be processed | Cast iron & Steel |
Based on advanced formulation and high quality base oil, BECHEM’s neat oil range possess,
- Excellent EP/AW properties – Longer tool life
- Excellent dirt carrying capability – Ensures cleaner machines
- Higher flash point – Ensures safe working environment
- Excellent oxidation stability – Resistant to ageing, Provides extended sump life
- Excellent filterability
- Provides good corrosion protection
- Free of Chlorine and heavy metals
Benefits for your Application
Excellent surface finish, longer tool life, minimal consumption of coolants, cleaner machines and hazard free working environment are some of the desired parameters that directly affect cost per component and productivity levels in metal working processes. BECHEM’s range of neat oils help customers achieve their productivity targets and much more,
Latest Blog Updates
Impact of high performance forming oil on metal shaving process
Performance Case study of special forming oil, Beruform MF 155 C in metal shaving operation and positive impact on rejection rates. Metal shaving is a finishing operation in which burrs…
A case study on effectiveness of MQL for drilling operation.
Drilling as a machining process is often considered a challenging process due to multiple factors such as strain hardening, toughness, high plasticity, tendency to form built-up edges and difficulty in…
Advanced neat oils for productivity and cleaner work environment
The research and advancement of neat oils in high speed metal cutting application is aimed at achieving higher productivity and improved surface quality. Unlike water miscible cutting fluids which are…