Synthetic Gear Oils

There are currently six basic families of synthetic lubricants that are recommended for applications: Synthetic Hydrocarbons (SHC), Polyglycols, Organic Esters, Silicones, Fluoroethers and Polyphenylethers. Each synthetic family has its own unique characteristics.

On a general note, synthetic lubricants, both greases and oils can withstand much broader temperature extremes (upto +250 °C & -50 °C) than mineral-based lubricants. Synthetic oils demonstrate relatively low evaporation rates and high oxidation stability at high temperatures compared to mineral oil range.

BECHEM’s range of synthetic gear oils

Berusynth GP Series (68 - 1000)

Berusynth GP series are Polyalphaolefin based high performance synthetic gear oils available from ISO VG 69 to 1000 with good viscosity temperature behaviour. Berusynth GP range of gear oils provide excellent oxidation, shear stability, superior load carrying capacity and wear protection. With very high ageing resistance, Berusynth GP series allows for extended oil changing intervals.The gear oil series with reduced coefficient of friction results in lower sump temperatures, minimum power loss and extended oil change intervals.

Applications: These specially formulated gear oils are recommended for heavily loaded spur gears, bevel spiral and worm gears in rolling mills, paper mills and textile manufacturing units. Berusynth GP range also provide superior results in roller and plain bearing applications where operating temperatures are constantly above 100 °C.

Please consult a BECHEM Application Engineer for selection of the suitable grade of ‘Berusynth GP’ series for your application.

Berusynth GP 68	High temperature High loads Closed gears Roller bearings
Base Oil	PAO
Type	CLP – HC
Temp Range °C	-30 to +140

Berusynth GP 150 to GP 460	High temperature High loads Closed gears Roller bearings
Base Oil	PAO
Type	CLP – HC
Temp Range °C	-35 °C to +150 °C

Berusynth GP 1000	High temperature High loads Closed gears Roller bearings
Base Oil	PAO
Type	CLP – HC
Temp Range °C	-25 °C to +180 °C

Berusynth EP Series (68 - 1000)

Berusynth EP series are Polyglycol based, high quality synthetic gear oil available from ISO VG 68 to 1000 with service temperature range of -30˚C to +180˚C. Berusynth EP range of gear oils provide excellent oxidation and shear stability, superior load carrying capacity and wear protection. With very high ageing resistance, Berusynth EP series allows for extended oil changing intervals.Possesses good viscosity-temperature behaviour. The gear oil series with reduced coefficient of friction results in lower sump temperatures, minimum power loss and extended oil change intervals.

Applications: These specially formulated gear oils are recommended for heavily loaded spur gears, bevel gears, spiral and worm gears in rolling mills, paper mills and textile manufacturing units. Berusynth EP range also provide superior results in roller and plain bearing applications where operating temperature are constantly above 100˚C.

Please consult a BECHEM Application Engineer for selection of the suitable grade of ‘Berusynth EP’ series for your application.

Berusynth EP Series (68 – 1000)	High temperature High loads Closed gears Roller bearings
Base Oil	Polyglycol
Type	CLP – PG
Temp Range °C	-30 to +140 -25 to +180