Anti Friction Coatings

Dry film lubricant with good adhesion and corrosion protection properties for metal to metal material pairings. Berucoat AF 732 is resistant to oil after curing and is recommended for life lubrication of construction parts of mechanical engineering such as gears, cam plates etc.

Applications: AF 732 prevents stick slip phenomenon and is suitable for lubrication of automotive components such as locking systems, sun visor, seat belt re-tractor latch, door openers, cigarette lighters, hinge pins, cams, key ways, springs, brake parts etc. Berucoat AF 732 is also recommended for effective lubrication of telescopic boom crane in combination with high performance grease, Berulub FR 43

Berucoat AF 932 is a priming coating for metallic surfaces that ensures effective lubrication of friction partners when used in combination with grease. AF 932 is suitable for metal to metal as well as metal to plastic material pairings. Heat cured, AF 932 has good adhesion on metallic surfaces and provides corrosion protection. The cured surface is resistant to oil, dust and dirt. AF 932 reduces friction and prevents stick slip phenomenon.

Applications: AF 932 is recommended for oil and grease lubricated components such as automotive ball joints, ball bearings etc.

High performance dry film lubricant with special combination of solid lubricant additives that ensures corrosion resistant surface that can withstand extreme wear. The coating needs to be heat cured and is recommended for metal to metal pairings.

Applications: Berucoat AF 991 is recommended for life lubrication of heavily loaded friction combinations and can withstand permanent exposure to oils and greases. This special anti friction coating is recommended for life coating of automotive pistons

Advanced dry film lubricant based on graphite and molybdenumdisulphide to withstand heavy loads and extreme wear. Berucoat AF 470 prevents stick slip phenomenon and repels dust and dirt. The special coating provides good resistance to radiation and has the lowest evaporation in high vacuum environments.

Applications: The air cured coating has good adhesion on metallic surfaces is recommended for metal to metal pairings.

Advanced anti friction coating with good adhesive and corrosion protection properties for metal to metal material pairings. AF 130 resists high pressure wear and has excellent temperature resistance behaviour. Berucoat AF 130 is resistant to oil after curing and is recommended for life lubrication of construction parts of mechanical engineering such as gears, cam plates etc.

Applications: AF 130 prevents stick slip phenomenon and is suitable for lubrication of automotive components such as locking systems, latch locking pawl, aluminium lobe, hinge pins, cams, keyways, springs, small steel and plastic gear, brake parts, special chains, all types of magnet armature etc. Berucoat AF 732 is also recommended for lubrication of telescopic boom crane in combination with Berulub FR 43

Berucoat AF 291 is an advanced anti friction coating with excellent temperature behaviour that protects frictional surfaces from wear. Also exposure to oils and greases does not impact the performance of AF 291. Berucoat AF 291 has good adhesion on metallic surfaces and provides corrosion protection as well.

Applications: Recommended for metal pairings, AF 291 provides life lubrication for applications bound to experience high friction combinations, such as automotive pistons.

Life lubricating, high performance anti friction coating for metal to metal material pairing that are exposed to heavy pressures. Berucoat AF 230 has excellent temperature resistance. Solid lubricants ensure low friction values even under heavy loads. Berucoat AF 230 is resistant to oil, grease and solvent after curing and has good corrosion protection properties.

Applications: The dry film lubricant has good adhesion on metallic surfaces and is recommended for application as life lubricant in automotive parts such as closure and locking systems, seat systems and fasteners, wiper mechanism reverts etc.

Recommended for metal to metal material combinations, Berucoat AF 438 is a dry film lubricant with good adhesion and fast drying properties for lubrication of plain bearings and precision mechansims. This special coating prevents stick slip phenomenon and is recommended for lubrication of spline gear pin. Berucoat AF 438 provides good resistance against radiation and has the lowest evaporation rate.

Applications: Suitable for pre treatment of surface exposed to high specific surface pressure such as gears, cam shafts, plain bearings and bushes

Recommended for metal to metal material combinations, Berucoat AF 481 is an efficient dry lubricant coating with excellent temperature and pressure resistance. The coating has no impact on permanent exposure to oils, greases and solvents.

Applications: The product is recommended for pistons, gaskets, bearings and seat mechanisms in the automotive industry.

Dry film lubricant with excellent compatibility with plastics, suitable for lubrication of interior automotive components. Berucoat AK 978 forms invisible film while preventing frictional wear and stick slip phenomenon. Free of Formaldehyde, Berucoat AK 978 contains UV indicator with the dry film layer visible under UV lamp

Applications: Recommended for lubrication of interior automotive components such as door trims, instrument panel, centre arm rest, head rest adjustment and sun roofs that experience repetitive sliding friction and wear. Also dampens noise generated by oscillation and vibration in the interior automotive cabin by materials such as plastics, leather and textile interface.

Special dry film coating for elastomer material to protect frictional surface against wear. Berucoat FX 671 is resistant to chemicals and prevents stick slip phenomenon.

Applications: The life lubricant with noise dampening properties is recommended for automotive applications

Effective anti friction coating with superior adhesion for elastomer material such as EPDM and NBR. The flexible coating after curing provides good resistance against chemicals and is resistant to abrasion.

Applications: Berucoat FX 172 is recommended for elastomers used in automotive industry to achieve special ‘textile-optic’ effect on the surface. Berucoat FX 172 is suitable for all seals in automobiles such as doors, front hood, hatchback, sun roofs and tops etc.

Berucoat MC 216 is an anti friction coating based on microcapsule technology, developed on the concept of ‘lubrication on demand. The advanced microcapsule technology within Berucoat MC 216 ensures outstanding life compared to conventional coatings. Berucoat MC 216 can be cured at comparatively lower drying temperatures which suits practical curing constraints of plastic mediums. The special coating prevents stick slip phenomenon and repels dust. Berucoat MC 216 is well suited for life lubrication of applications such as sliding rails, joints, guides and spindle drives

Applications: Recommended for material pairings of steel with steel as well as steel with plastic, the microcapsules containing special lubrication additives get activated by forming an additional film at frictional loads thereby protecting the frictional surfaces from any wear.